Checking the Battery Charge

You can check the battery charge in three ways:

  1. Using the remote. Press the gray multi-button on the remote once. The lights on the remote will indicate remaining capacity.
  2. Opening the app. For 2nd generation boards, the battery pack must be mounted to the board to give a reading.
  3. Through a set of indicator lights on the pack itself (2nd generation only). Gently press the power button. The five LED lights on the battery pack will illuminate and indicate the remaining capacity. Each solid light represents 20% charge. Each blinking light represents 10% charge. For example, four solid lights and one blinking light means there is 90% charge remaining. The battery pack’s power button light will also change from red to green when it is fully charged.
Was this article helpful?
3 out of 7 found this helpful



Please sign in to leave a comment.

Can't find what you're looking for?

Contact Us