Clicking Bearings

Don’t worry, this is a fairly regular and normal occurrence, especially with the drive wheels. There are several solutions to remedy this. Often the axle nut is too tight and will cause one or more bearings to click. Using a skate tool, tighten the nut until it is tight and then back it off a quarter turn or so until the clicking stops but there is no lateral movement of the wheel. Another remedy is to use a little white lithium grease on the bearing seats (where the bearing rests in the wheel).

Was this article helpful?
58 out of 95 found this helpful

Comments

1 comment

  • Avatar
    Richard Micham

    I had this is issue occur twice on two separate wheels. I feared the issue was with something more expensive, but this fixed the noise each time.

Please sign in to leave a comment.

Can't find what you're looking for?

Contact Us