Stem Catch Replacement

Difficulty Rating: 1

Estimated Time: less than 5 minutes

Tools you will need:

  • 2mm hex key
  • Thin pliers or tweezersimage4.jpg

 

1. Remove the screws on both sides of the stem catch using a 2mm hex key.

image6.jpg

2. The stem catch can now be removed. It can help to use tweezers, or thin pliers to pull it off.

image2.jpg

image1.jpg

3. Slide new stem catch onto the stem until it latches into place.

image5.jpg

4. Reinstall the screws on both sides with a 2mm Allen wrench.

image3.jpg

Was this article helpful?
1 out of 3 found this helpful

Comments

0 comments

Article is closed for comments.

Can't find what you're looking for?

Submit a Request